Special acrylic primer

Description

Acrylic primer is made according to modern European technology based on acrylic resin and is soluble in water. Because acrylic primer is soluble in water, it is non-flammable, completely hygienic and harmless to humans and the environment. This coating is used as a primer to increase the adhesion of acrylic paints, kinetex, texture, mineral, facade insulation paint and roof insulation (white insulation) to the work surface. Acrylic primer penetrates into the pores of the surface and due to the closing of the pores, it reduces the consumption of paint on the interior and exterior surfaces of the building. It should be noted that the use of primer is mandatory for painting the interior walls of the building.

Functions

Increasing the adhesion of paint and water-based coatings to the work surfaces

Typical Uses

• Excellent penetration and adhesion
• Increased surface adhesion
• ready to consume and quick dry
• Easy, fast, uniform execution and simple restoration
• Suitable, cost-effective and economical coating surface
• Water base, no unpleasant smell and eco-friendly

Licenses

1. Ministry of Petroleum (Iran) Vendor
   2. The Institute of Standards and Industrial Research of Iran
   3. Research Institute of National Iranian Petroleum Industry Oil Company
   4. National Iranian Gas Company
   5. Road, Housing and Urban Development Research Center
   6. Tehran College of Electrochemistry
   7. Amir Kabir University of Technology
   8. Razi Metallurgical Research Center
   9. Iranian Ministry of Roads and Urban Development Laboratory
   10. Ministry of Defense

Technical Data

• Color: White
• Base: Water
• Type of resin: acrylic
• Number of components: one component
• Density: 0.02±0.05 g/cm³
• Surface drying time: at least 30 minutes
• Complete drying time: at least 2 hours
• Covering area per kilogram: 8-10 square meters according to thickness

Implementation Method

Surface preparation:
1. The work should be free of moisture, dirt, grease.
2. Remove loose parts from the surface.
3. Repair deep cracks, seams and joints with special putty.

The execution is done in one step:
– Primer layer: apply acrylic primer without diluting it on the entire surface.
– Protect the acrylic primer from rain and freezing before it dries completely.
– At least 2 hours after applying the primer layer, apply acrylic paint or insulating paint on the surface.

Implementation Tools

✔ Paint Brush, Roller and Pistol spray.